manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 385

n

Machine operator

n

Slinger

n

Auxiliary crane

n

Ladder

n

Lifting equipment

Requirement:

n

Uppercarriage is at 0°.

n

The boom is fully retracted.

n

The boom is lowered to 0°.

n

The hoisting rope is unreeved.

n

The deflection sheave is mounted on the boom.

n

The 

Setup attachment

 setup mode is set on the SENCON.

n

The diagonal tie of the heavy-duty jib is in the working position.

n

The bolts at the connection points to the boom have been

removed.

1.

Attach suitable hoisting gear to the heavy-duty jib at the lifting

point to an auxiliary crane.

2.

Using the auxiliary crane, lift the heavy-duty jib to the boom's

pulley head.

Personnel

Tools

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

385

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands