Manitowoc 140.5.204 Operation Manual Download Page 434

Page: 434 / 669

Risk of crushing due to unintended machine movement when

starting the engine!
If the joystick or drive pedal is operated at the same time the

engine is started, persons can be injured due to unintended

machine movement.

–

The safety lever has been pulled back. All hydraulic work

functions and the drive function are locked.

–

Only push the safety lever in the direction of travel after

the engine has started.

After switching on the ignition, the engine can be started in two

ways:

using the ignition key

using the

[Engine start]

switch

Requirement:

The ignition key is in position

[I]

Press the

[horn]

button on the joystick.

Turn the ignition key to position

[II]

Press button

The horn is triggered.

An acoustic signal will sound.

Position

[P]

Position

[0]

Position

[I]

Position

[II]

With fuel pump

(option): The

machine can be

refueled using the

fuel pump.

Without fuel pump:

no function

The ignition is off.

No power supply is

applied.

The control and dis-

play elements are

non-functional.

The ignition is

switched on.

Power supply is

applied.

Electric functions

are available.

The engine is

started.

The engine is run-

ning.

Electric and

hydraulic functions

are available.

Requirement:

WARNING

Starting the engine using the igni-

tion key

Horn

Ignition switch

Starting the engine using the

[Engine start]

switch

Operation

27.04.2020

140.5.204 Telescopic crane

434

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands