Manitowoc 140.5.204 Operation Manual Download Page 267

Page: 267 / 669

6.6.7.1

Locking the uppercarriage

Requirement:

The engine is switched on.

The SENCON is ready for operation.

The safety lever is pushed forward.

The uppercarriage is in 0° position.

Press the

[Unlock/lock uppercarriage]

quick-select button.

The

[Unlock/lock uppercarriage]

status display shows a

yellow bar.

The

[uppercarriage locking]

icon on the SENCON start

screen is gray.

Grey

Green

Uppercarriage is unlocked.

Uppercarriage is locked.

Yellow bar

Black bar

Uppercarriage is locked.

Uppercarriage is unlocked.

6.6.7.2

Setting the extension mode, boom length, and boom angle

To change the track width, a specific extension must be set and the

boom must be extended to a predefined length.

The boom must be lowered to the specified angle.

6.6.7.2.1 Setting the extension mode and boom length

Data

Value Unit

Extension mode

EM5

Boom length

24.1 m

Boom length

79.1 ft

Requirement:

Uppercarriage locking mechanism

Extension mode and boom length

for changing the track width

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

267

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands