Manitowoc 140.5.204 Operation Manual Download Page 337

Page: 337 / 669

Remove the lifting equipment.

Move the auxiliary crane out of the work area.

6.7.4.5

Folding the pilot ramp

6.7.4.5.1 Folding out the ramp

Always fold out the pilot ramp before folding the fly boom (with fly

boom extension) into the transport or working position.

Release the bolt connection at the ramp.

Fold out the ramp.

Secure the unfolded ramp with the bolt and spring cotter pin.

6.7.4.5.2 Folding in the ramp

Always fold in the pilot ramp after folding the fly boom (with fly

boom extension) into the transport or working position.

Removing the lifting equipment

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

337

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands