manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 66

Safety feature

Description

Illustration

Lifting limit switch

The lifting limit switch switches off

lifting movement in the winch at a

determined height. As a result, a

collision between the bottom hook

block and the pulley head is pre-

vented. Additionally, extending

and retracting are switched off.

Length indicator and angle indi-

cator

The length and angle transmitter

measures both the angle and the

length of the telescopic boom.

This is transmitted to the RCL. If

the length or angle of the tele-

scopic boom fall in the non-per-

mitted area, the RCL switches off

all load moment-raising machine

operations.

Safety instructions

27.04.2020

140.5.204 Telescopic crane

66

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands