manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 643

9.7.2.5 

Installing the track wheel carrier

Risk of tipping from track wheel carrier swinging against the

outrigger cylinder!
–

Guide the track wheel carrier during lifting and keep it

clear of the outrigger cylinders.

–

There must be no-one under the machine during assembly.

If a track wheel carrier swings against an outrigger during

assembly or disassembly, the machine may tip over. This can

cause serious injury.

Risk of death due to machine tipping over.
–

The transport vehicle is always positioned next to the

track wheel carrier that is to be set up. The track wheel

carrier is lifted directly onto the transport vehicle or lifted

by the transport vehicle directly to the respective cross

member.

–

Do not slew the uppercarriage when the track wheel car-

rier is attached to the hook.

The machine may tip if subject to load on one side only during

attachment or removal of the track wheel carriers. This can

cause death or serious injury.

1

Incorrect

2

Correct

L

 WARNING

L

 WARNING

Transport

27.04.2020

140.5.204 Telescopic crane

643

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands