manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 127

The hoisting rope of winch 1 is reeved into the pulley head of the

attachment. The hoisting rope of winch 2 is reeved into the pulley

head of the main boom.

4.2  Function description

4.2.1  Load moment limitation

The RCL gives the operator information needed to operate the

machine within the operating ranges specified by the manufacturer.

The operator's experience, prudence and judgment are required to

ensure safe operation of the RCL.

Using sensors, the RCL monitors machine functions and continu-

ously provides the performance data of the machine to the oper-

ator. This data changes continuously as the machine moves. When

the machine approaches the maximum load rating, the RCL warns

the operator via a warning tone and a visual signal.

If the machine reaches the inadmissible area of operation, any

machine movements which increase the machine load moment are

shut down. In order to unload the machine after the RCL is tripped,

the 

Lower loads

 and 

Retract telescopic boom

 movements can

still be executed.

n

Pressure sensors on the luffing cylinder

n

Length and angle indicator, cable drum on the boom

n

Lifting limit switch on the boom's pulley head or on a attach-

ment

n

Rope end limiter on the winch

Components of the LML

Design and function

27.04.2020

140.5.204 Telescopic crane

127

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands