Manitowoc 140.5.204 Operation Manual Download Page 487

Page: 487 / 669

[Securing of secure locking unit]

black

[Locking mechanism of telescopic

thruster]

black

The secure locking unit is not secured

and can be moved in the boom.

The telescopic thruster is locked and

cannot be moved.

The values in the

[Telescopic thruster position indicator]

show 0%, approx. 50%, or 100%.

[Securing of secure locking unit]

yellow

[Locking mechanism of telescopic

thruster]

black

The secure locking unit is secured in the

telescopic thruster and cannot be moved.

The telescopic thruster with the secured

secure locking unit has a gray back-

ground on the

[Telescopic thruster position indicator]

The telescopic thruster is locked and

cannot be moved.

The values in the

[Telescopic thruster position indicator]

show 0%, approx. 50%, or 100%.

[Securing of secure locking unit]

yellow

[Locking mechanism of telescopic

thruster]

yellow

The secure locking unit is secured in the

telescopic thruster and cannot be moved.

The telescopic thruster with the secured

secure locking unit has a gray back-

ground on the

[Telescopic thruster position indicator]

The telescopic thruster is not locked and

can be moved.

The

“Pin boom”

menu page is displayed on the SENCON.

Determine the status of the telescopic thrusters.

Secured telescopic thruster

In the case of a telescopic thruster with the status "secured and not

locked", see "Determining the next possible locking position" for

information on how to proceed.

Status: "locked and secured"

Status: "secured and not locked"

Determining the status of the tele-

scopic thrusters

Operation

27.04.2020

140.5.204 Telescopic crane

487

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands