manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 195

 

Grey

Orange

The engine is ready to start.

The preheating process is complete.

The engine is preheating.

 

Grey

Orange

Red

There are no faults.

A note is displayed.

—

—

There is a medium fault.

An acoustic signal (single

tone) will sound.

—

—

—

There is a serious fault.

An acoustic signal (continuous

tone) will sound.

 

Grey

Orange

Red

The load moment is in the per-

missible range.

The load moment is about to

be exceeded.

An error message is shown.

The maximum permissible

load moment has been

exceeded.

An error message is shown.

 

Grey

Orange

Red

The load is in the permissible

range.

The load capacity is about to

be exceeded.

The maximum permissible

load capacity has been

exceeded.

An acoustic signal will sound.

—

—

No load torque monitoring

The LML is bypassed.

Engine preheating

Machine fault display

Load moment limitation

Load capacity

Control and display elements, operating modes

27.04.2020

140.5.204 Telescopic crane

195

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands