manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 536

7.19.11  Switching the windshield washer system on/off

 

Switch position left

Switch position right

The windshield washer system for the

windshield is switched off.

The windshield washer system for the

windshield is switched on.

 

Switch position left

Switch position right

The washer system on the glass roof

panel is switched off.

The washer system on the glass roof

panel is switched on.

 

Switch position left

Switch position right

The windshield washer system for the

windshield is switched off.

The windshield washer system for the

windshield is switched on.

Requirement:

n

The ignition key is in position 

[I]

.

1.

Press and hold the 

[Windshield wiper]

 switch.

ð

The washer fluid is sprayed on the windshield. The wind-

shield wiper wipes a few times.

2.

Release the 

[Windshield wiper]

 switch.

ð

The windshield washer system is off.

7.20  Malfunctions

7.20.1 

Possible malfunctions and faults

All maintenance, inspection and troubleshooting personnel must

have the appropriate qualifications for these tasks.

For activities not described in detail, please contact the service

partner.

Windshield washer system

Roof panel washer system

Lower windshield washer system

(option)

Operation

27.04.2020

140.5.204 Telescopic crane

536

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands