manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 608

n

The 

Setup ballast

 setup mode is set.

n

The extension mode and the boom length for setting up the

track wheel carriers has been set.

1.

Remove the track wheel carrier horizontally and evenly from

both cross members.

Slightly lower the boom and tighten the hoisting rope. Repeat

the process until the track wheel carrier is removed from the

cross member.

Ensure that the track wheel carrier does not bend.

ð

The track wheel carrier is removed from the cross

member.

2.

Place the track wheel carrier on the transport vehicle.

3.

Remove the lifting equipment.

4.

Remove the edge guard.

Transport

27.04.2020

140.5.204 Telescopic crane

608

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands