Manitowoc 140.5.204 Operation Manual Download Page 418

Page: 418 / 669

DEF can be filled in up to a minimum ambient temperature of

-11° C (12.2° F). At temperatures below -11° C (12.2° F) the DEF

will crystallize.

Preconditions:

The machine is turned off.

The machine is on firm and level ground.

DEFtank

Cap

Check the DEF tank for exterior soiling and spilled DEF.

Clean as needed.

Carefully open the sealing cover of the DEF tank.

Pour new DEF into the DEF tank.

Close the sealing cover.

“DEF level” on page 433

Further notes

Operation

27.04.2020

140.5.204 Telescopic crane

418

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands