Manitowoc 140.5.204 Operation Manual Download Page 152

Page: 152 / 669

Slewing gear freewheeling enabled

Pedal not depressed

Slewing gear freewheeling enabled

Pedal depressed

Uppercarriage slewing will not be

stopped.

Uppercarriage slewing will be stopped.

If the slewing gear freewheel is deactivated, uppercarriage slewing

will be stopped hydraulically.

Pedal depressed

Release depressed pedal Pedal not depressed

The engine speed is

increased.

The engine speed

decreases.

The engine runs at idle

speed.

The drive pedal and the hand lever are interconnected. When the

drive pedal moves, the hand lever moves, too, and vice versa.

If the uppercarriage is in 180° position, the drive operations

described below take place in the opposite direction.

Movement of hand levers/pedals

Movement with uppercarriage position 0°

Release both hand levers/pedals.

The machine stops.

Positioning slewing gear brake

Drive engine speed adjustment

Drive pedals and hand levers

Stopping the machine

Control and display elements, operating modes

27.04.2020

140.5.204 Telescopic crane

152

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands