Manitowoc 140.5.204 Operation Manual Download Page 642

Page: 642 / 669

The outrigger cylinders are fully lowered.

Extend the cross members to the maximum track width.

Lubricate the friction surfaces on the track wheel carriers and

on the cross members.

Chapter 6.6.7.4 “Increasing the track width” on page 277

9.7.2.4

Setting the extension mode and boom length

In order to set up the track wheel carriers with the

Setup ballast

setup mode, a specific extension mode must be set and the boom

must be extended to a predefined length.

Data

Value Unit

Extension mode

EM1

Boom length

12.3 m

Boom length

40.4 ft

Requirement:

The boom angle is > 60°.

Open the

“Pin boom”

menu page.

Set the specified extension mode on the SENCON.

Tilt the joystick in the

[Extend telescope]

[Retract telescope]

direction.

Extend or retract the boom until it has reached the predefined

length.

two functions are assigned

on the joystick, the relevant switch

must be in the correct position in order to carry out the respective

function.

Chapter 7.15.2 “Retracting/extending the boom” on page 481

Further notes

Extension mode and boom length

for setting up the track wheel car-

riers

Further notes

Transport

27.04.2020

140.5.204 Telescopic crane

642

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands