manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 413

7.4  Filling up with fuel

Risk of damage to health and the environment from escaping

fuel.
–

Smoking or handling open flames is strictly prohibited.

–

Park the machine only on a firm and level ground.

–

Only top up when the engine is shut down.

–

Determine the tank level prior to refueling.

–

Always ensure that no fuel overflows when refueling.

–

When refueling from a tanker, ensure that the maximum

filling rate of 120 l/min. (32 US gpm) is not exceeded.

–

Always supervise the refilling process.

Contact with fuel can be seriously harmful your health. Fuel

seeping into the soil or bodies of water will harm the environ-

ment.

The machine can be refueled in two ways:

n

Manually

n

Using a fuel pump (option)

Observe the information on the fuel system in the engine manufac-

turer’s operating manual.

L

 WARNING

Operation

27.04.2020

140.5.204 Telescopic crane

413

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands