manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 153

Movement of hand levers/pedals

Movement with uppercarriage position 0°

Move both hand levers/pedals in the

direction of travel.

The machine travels forward in a

straight line.

Movement of hand levers/pedals

Movement with uppercarriage position 0°

Move both hand levers/pedals

against the direction of travel.

The machine travels in reverse in a

straight line.

Movement of hand levers/pedals

Movement with uppercarriage position 0°

Release the left hand lever/left

pedal.

Move the right hand lever/pedal in

the direction of travel.

The machine travels forward to the

left.

Movement of hand levers/pedals

Movement with uppercarriage position 0°

Release the left hand lever/left

pedal.

Move the right hand lever/pedal

against the direction of travel.

The machine travels in reverse to

the left.

Travel forward in a straight line

Travel in reverse in a straight line

Travel forward to the left

Travel in reverse to the left

Control and display elements, operating modes

27.04.2020

140.5.204 Telescopic crane

153

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands