manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 500

n

The load and its center of gravity are known.

n

The load is suspended vertically.
–

The upper attachment point on the load is fastened to the

rope of the attachment.
The rope of the attachment carries the entire weight of the

load.

–

The lower attachment point on the load is fastened to the

rope of the boom.
The rope of the boom is not bearing any weight.

n

The rope of the boom must be lightly tensioned so that the

rope does not drag.

Observe the set allocation of the winches to the joysticks.

1.

Tilt the joystick in the 

[Raise winch 2]

 direction until the load

is at the horizontal position.

2.

Tilt the joysticks simultaneously in the 

[Lower winch 1]

 and

[Lower winch 2]

 direction.

ð

The load is lowered.

The load is horizontal during the entire lowering process.

7.15.4.4.3 

Moving the load vertically with two winches

Requirement:

n

The extension mode is set for the application at hand.

n

The operation parameters for Tilt-Up Panel Lifting have been

set on the SENCON.

n

The status indicator of the 

[Tilt-Up Panel Lifting]

 quick-select

icon lights up yellow.

Operation

27.04.2020

140.5.204 Telescopic crane

500

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands