manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 517

1.

Pull the door handle.

ð

The cab door locking mechanism is released.

2.

Push the cab door forward until it audibly locks into place.

ð

The cab door is engaged.

3.

Lock the cab door with the ignition key.

ð

The cab door is locked.

7.18.3 

Leaving the machine

Risk of falling or impact when climbing onto and down from

the machine!
–

Position the uppercarriage relative to the undercarriage so

that safe entry/exit is ensured via the steps.

–

Use handles, access ladders, and walkways when

climbing up on and down from the machine.

–

Keep the access ladders and walkways clean and clear of

dirt, snow, and ice.

There is a risk of the operator slipping and falling when

climbing up on down from the machine. If the uppercarriage is

in an unfavorable position in relation to the undercarriage, the

operator may get injured.

Close the cab door from the out-

side

Safety instructions

L

 WARNING

Operation

27.04.2020

140.5.204 Telescopic crane

517

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands