Manitowoc 140.5.204 Operation Manual Download Page 312

Page: 312 / 669

Fig. 26: Position of the chain shortener on the outer side and on

the inner side of the ballast blocks

Check the position and alignment of the chain shorteners.

Route the chain extension around the holder on the outer

side of the ballast bracket. Connect the chain with the chain

shortener.

Connect chain and chain extension on the outer side so that

5 chain links of the chain extension project.

Route the chain extension around the holder on the inner

side of the ballast bracket. Connect the chain with the chain

shortener.

Connect chain and chain extension on the inner side so that

6 chain links of the chain extension project.

Turn the turnbuckle handle until the safety chain is tensioned.

Repeat these steps to mount the safety chain on the other

side.

The counterweight is secured.

6.6.9.1.4 Setting the extension mode and boom length

In order to set up the counterweight with the

Setup ballast

setup

mode, a specific extension must be set and the boom must be

extended to a predefined length.

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

312

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands