manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 158

 

Pull switch

Press switch

The machine is ready for operation.

The engine and all machine movements

are stopped.

 

Switch position left

Switch position right

The machine cannot be moved.

The machine can be moved.

 

Switch position left

Switch position right

Lower speed and higher tractive force are

set.

More sensitive driving is possible.

Higher speed and lower tractive force are

set.

 

Switch position left

Switch position Center

Switch position right

The cab incline increases.

The cab does not move

The cab incline decreases.

 

Switch position left

Switch position Center

Switch position right

The cab moves up.

The cab does not move

The cab moves down.

Emergency stop

Activate drive mode

Drive slow - fast

Tilting the cab

Lift/lower cab (option)

Control and display elements, operating modes

27.04.2020

140.5.204 Telescopic crane

158

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands