Manitowoc 140.5.204 Operation Manual Download Page 249

Page: 249 / 669

In this section, no further reference is made to content provided in

section "Operation".

Chapter 7 “Operation” on page 408

6.2 Safety instructions regarding setup

Falling machine or accessories from incorrect lifting
–

Ensure that the sling gear has sufficient load-bearing

capacity and is not damaged.

–

Only attach the machine and all accessory parts at the

defined lifting points.

If the machine or accessories are lifted incorrectly, the load

could fall. This can cause serious injury.

Risk of injury in the slewing range!
–

Only banksmen or slingers are allowed in the slewing

range.

–

Keep in constant contact with all persons involved!

In the slewing range of the machine, persons can be struck

and fatally injured by falling loads at any time and unexpect-

edly.

Danger of falling.
–

Do not climb onto the boom or the attachments.

–

Do not climb onto equipment parts (for example, boom

sections, ballast parts) hanging from a crane.

–

Use secure climbing equipment when bolting the attach-

ments.

–

Depending on the work height, use a ladder in accordance

with the applicable standards and regulations.

Risk of crushing due to unintended machine movement when

starting the engine!
If the joystick or drive pedal is operated at the same time the

engine is started, persons can be injured due to unintended

machine movement.

–

The safety lever has been pulled back. All hydraulic work

functions and the drive function are locked.

–

Only push the safety lever in the direction of travel after

the engine has started.

Danger of electric shock!
–

The machine must only be connected by qualified experts

(electricians).

Contact with live parts or electrostatically charged housing

parts.

Further notes

DANGER

WARNING

CAUTION

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

249

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands