manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 617

2.

Tilt and hold upward the

[Extend/retract rear left outrigger cylinder]

 lever on the Setup

remote radio control until the outrigger cylinder has reached

fastening position P1.

1

Bolt in fastening position P1

3.

Mount and secure the bolt in fastening position P1.

4.

Tilt and hold downward the

[Extend/retract rear left outrigger cylinder]

 lever until the out-

rigger cylinder is fully retracted.

5.

Repeat these steps to change the fastening position of the

remaining outrigger cylinders from P2 to P1.

1

Adapter

2

Outrigger pad

Remove the adapter from the outrigger pad.

Removing the adapter

Transport

27.04.2020

140.5.204 Telescopic crane

617

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands