manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 199

 

X: EE.E °

Y: EE.E °

X: EE.E °

Y: EE.E °

The machine inclination is indicated in

the positive or negative x direction.

The machine inclination is indicated in

the positive or negative y direction.

5.3.8.2 

Information symbols

 

Green

Winch 2 is operated with the left joystick.

Winch 1 is operated with the right joystick.

This allocation is the default assignment for the joysticks.

Winch 1 is operated with the left joystick.

Winch 2 is operated with the right joystick.

 

Grey

Green

The swing park brake is disengaged.

Slewing the uppercarriage is possible.

The swing park brake is actuated.

Slewing the uppercarriage is not possible.

 

Grey

Green

The slewing gear freewheel is disengaged.

The uppercarriage remains stationary once the

joystick that has been moved is released.

The slewing gear freewheel is engaged.

The uppercarriage continues to slew, without

the speed being reduced, once the joystick that

has been moved is released.

—

Slewing gear freewheel not available.

The uppercarriage inclination is more than

0.6°.

Machine inclination

Allocation of winches and joysticks

Swing park brake

Slewing gear freewheeling

Control and display elements, operating modes

27.04.2020

140.5.204 Telescopic crane

199

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands