Manitowoc 140.5.204 Operation Manual Download Page 557

Page: 557 / 669

Remove the extension cable from the 400 V power socket.

[LML bypass]

push button pressed

and

[LML bypass]

key switch held in

[I]

position

[LML bypass]

push button not pressed

and/or

[LML bypass]

key switch released

The LML is bypassed.

The speed of crane control functions is

not limited.

The load moment limitation is activated.

Pull switch

Press switch

The machine is ready for operation.

The engine and all machine movements

are stopped.

Switch position left

Switch position right

It is not possible to use the hydraulic

power unit.

The hydraulic power unit has been

released for use.

7.20.2.4

Setting up the machine via emergency control

The emergency control function can be used to complete the fol-

lowing tasks if the Setup remote radio control is out of order.

Bolt/unbolt the counterweight

Extend/retract the ballasting cylinder

LML bypass key switch and push

button

Emergency stop

Release hydraulic power unit

(option)

Operation

27.04.2020

140.5.204 Telescopic crane

557

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands