manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 154

Movement of hand levers/pedals

Movement with uppercarriage position 0°

Move the left hand lever/pedal

against the direction of travel.

Move the right hand lever/pedal in

the direction of travel.

The machine turns left on the spot.

Movement of hand levers/pedals

Movement with uppercarriage position 0°

Move the left hand lever/pedal in

the direction of travel.

Release the right hand lever/pedal.

The machine travels forward to the

right.

Movement of hand levers/pedals

Movement with uppercarriage position 0°

Move the left hand lever/pedal

against the direction of travel.

Release the right hand lever/pedal.

The machine travels in reverse to

the right.

Movement of hand levers/pedals

Movement with uppercarriage position 0°

Move the left hand lever/pedal in

the direction of travel.

Move the right hand lever/pedal

against the direction of travel.

The machine turns right on the spot.

Turn left on the spot

Travel forward to the right

Travel in reverse to the right

Turn right on the spot

Control and display elements, operating modes

27.04.2020

140.5.204 Telescopic crane

154

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands