Manitowoc 140.5.204 Operation Manual Download Page 226

Page: 226 / 669

5.3.11.4

“Winch”

menu page

The

“Winch”

menu page measures how long each winch is oper-

ated within a line pull range. The measurement starts at the time of

the initial startup of the machine and cannot be reset.

Line pull ranges are shown as a percentage of total operation. The

example shows that winch 1 was operated at a line pull of 2.5 t to

12.5 t (2.7 US tons to 13.7 US tons) for 25% of the overall oper-

ating time and 12.5 t to 25 t (13.7 US tons to 27.5 US tons) for 75%

of the overall operating time.

Line pull is shown in decitons. Accordingly, a value of

125

on the

X-axis corresponds to a line pull of 12.5 t (13.7 US tons).

Total winch operating hours

5.3.11.4.1

Display elements

Display

Displays the overall operating hours.

Operating hours

Control and display elements, operating modes

27.04.2020

140.5.204 Telescopic crane

226

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands