manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 299

1

Jump-off guard at lower pulley head

2

Jump-off guard at upper pulley head

2.

Release the retaining springs of the jump-off guards at the

pulley head.

3.

Remove all jump-off guards at the pulley head.

 Reeving the hoisting rope with attachments

–

Guide the hoisting rope over the mounted deflection sheave on

the main boom to the pulley head of the attachment.
(applicable to fly boom without/with fly boom extension and

heavy-duty jib)

–

Pay attention to the allocation of the hoisting ropes for the main

boom and attachments.

4.

Continue to wind the hoisting rope from the winch until

enough rope is available for reeving between the pulley head

and bottom hook block.

5.

Reeve the hoist rope according to the reeving plan.

6.

Mount all jump-off guards at the pulley head.

7.

Secure the jump-off guards at the pulley head with the safety

pins.

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

299

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands