manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 313

Data

Value Unit

Extension mode

EM1

Boom length

19.9 m

Boom length

65.3 ft

Requirement:

n

The boom angle is > 60°.

1.

Open the 

“Pin boom”

 menu page.

2.

Set the specified extension mode on the SENCON.

3.

Tilt the joystick in the 

[Extend telescope]

 or

[Retract telescope]

 direction.

Extend or retract the boom until it has reached the predefined

length.

If 

two functions are assigned

 on the joystick, the relevant switch

must be in the correct position in order to carry out the respective

function.

Ä

 Chapter 7.15.2 “Retracting/extending the boom” on page 481

6.6.9.1.5  Moving the machine to the counterweight

n

Machine operator

n

Banksman

Extension mode and boom length

for setting up the counterweight

Further notes

Personnel

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

313

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands