Manitowoc 140.5.204 Operation Manual Download Page 457

Page: 457 / 669

The slewing gear brake is actuated in the following ways:

Automatically
–

With the uppercarriage at a standstill and inactive slewing

gear freewheel

–

By pulling the safety lever

–

By switching off the engine

Manually
–

Using the joystick

Requirement:

The engine is switched on.

The SENCON is ready for operation.

The safety lever is pushed forward.

Press the

[Activate / deactivate slewing gear brake]

button on

the joystick.

The

[slewing gear brake]

information symbol on the

SENCON lights up green.

Press button

The swing park brake is activated.

The swing park brake is deactivated.

Grey

Green

The swing park brake is disengaged.

Slewing the uppercarriage is possible.

The swing park brake is actuated.

Slewing the uppercarriage is not possible.

7.12.4.6

Locking the uppercarriage

Requirement:

The engine is switched on.

The SENCON is ready for operation.

Activating the slewing gear brake

manually

Swing park brake

Operation

27.04.2020

140.5.204 Telescopic crane

457

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands