manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 97

Shown

Meaning

SEBO no.

Rotating machine can cause death or serious injury. Warning

– danger due to contact, crushing, shearing:

n

Do not stay in the danger zone.

187993

Shown

Meaning

SEBO no.

Danger of falling due to exceeding the maximum load of the

walkway per segment.

n

Do not exceed the maximum load of the walkway.

187962

3.5  Personnel

3.5.1  Personnel qualifications

Different groups of people must have different qualifications.

n

Machine operator

n

Slinger

A specialist has the technical training and experience necessary to

safely operate the machine without assistance in accordance with

the applicable standards. They are able to operate, set up, and, to

a certain extent, maintain the machine. A specialist is able to rec-

ognize and avert potential dangers during the work.

n

Banksman

Instructed personnel are able to perform the tasks assigned to

them without assistance after receiving appropriate instruction.

They recognize and prevent potential dangers by acting in a proper

manner. They are familiar with the necessary protective devices

and measures, applicable regulations and accident prevention

guidelines.

Warning - danger due to moving

machine parts

Warning against collapse

Specialist

Instructed personnel

Safety instructions

27.04.2020

140.5.204 Telescopic crane

97

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands