manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 626

9.6.5  Securing the machine for transport

9.6.5.1 

Moving the boom into transport position

Risk of machine damage due to improper operation of the

load hook when the limit shutdown is bypassed
–

When the lifting limit switch is bypassed, lift the load hook

slowly.

–

Maintain the specified safety distance between the load

hook and the pulley head.

–

When the load hook is resting on the ground, do not con-

tinue lowering the hook.

When the boom limit shutdown is bypassed, the load hook

hits the pulley head. This can cause severe damage to the

machine. The rope is damaged if the joystick is tilted further in

the 

[Lower hook]

 direction when the load hook is resting on

the ground.

Data

Value Unit

Safety distance between the load hook

and pulley head

1 m

Safety distance between the load hook

and pulley head

3.3 ft

After loading, the machine must be moved into a safe position for

transport.

1.

Set the 

Setup ballast

 setup mode using the quick-select

button on the SENCON.

2.

Depending on the transport safeguard, lower the boom as far

as possible.

3.

Turn off the machine.

 

Yellow bar

Black bar

The 

Setup ballast

 setup mode with preset

operation parameters is activated.

The minimum limit value of the working radius

is restricted.

The 

Setup ballast

 setup mode with preset

operation parameters is deactivated.

The operation parameters can be changed.

NOTICE

Safety distance of the load hook

when the limit shutdown is

bypassed

Setup ballast

Transport

27.04.2020

140.5.204 Telescopic crane

626

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands