manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 586

9.5  Leaving the machine

Danger of falling.
–

Use suitable stable ladders to climb up and down.

–

Position ladders on level ground.

–

Do not carry any objects by hand when climbing up or

down.

–

Always face the machine.

–

Always make sure you have at least three points of con-

tact with the ladder and grip handles when climbing up or

down. Two hands and one foot, or two feet and one hand

must remain in contact with the ladder steps and the grip

handles at all times.

Steps and walkway gratings are folded in or dismounted for

transport. Therefore, when climbing into and out of the

machine, there is an increased risk of falling and sustaining

injuries.

n

Machine operator

n

Instructed personnel

n

Ladder

1.

Have a second person position a ladder at the machine so

the ladder is easy to access from the machine's cab door.

2.

Open the cab door.

3.

Use the grip handle to exit the cab.

4.

Lock the cab door.

5.

Remove the ladder.

Safety instructions

L

 WARNING

Personnel

Tools

Exiting the cab

Transport

27.04.2020

140.5.204 Telescopic crane

586

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands