manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 58

2.6.6.3 

Permissible maximum wind speeds

The stated values apply whether the machine is used with or

without attachments.

Data

Value Unit

Permissible wind speed when machine

is in operation

14 m/s

Permissible wind speed when machine

is in operation

31 mph

Permissible wind speed when machine

is not in operation

20 m/s

Permissible wind speed when machine

is not in operation

44 mph

Gusts of wind must be taken into account when determining wind

speeds.

Data

Value Unit

Permissible wind speed of a 3-second

gust

14.1 m/s

Permissible average wind speed at a

height of 10 m

10 m/s

2.6.7  Emissions

The continuous sound pressure level L

pA

 of the machine is meas-

ured in the driver seat with the cab closed.

Data

Value Unit

Sound power level L

pA

 (in the cab) in

accordance with DIN EN ISO

11201:2010-10

<80 db(A)

Sound power level L

wA

 (outside) in

accordance with Directive 2000/14/EC

102 db(A)

Data

Value Unit

Hand/arm vibrations

<2.5 m/s

2

Full body vibrations

<0.5 m/s

2

2.7  Equipment

The standard version of the machine can be retrofitted with addi-

tional equipment that is available for purchase. In this manual,

additional equipment is labeled with "Option" in the product

description.

Maximum wind speeds

Noise

Vibration

Product description

27.04.2020

140.5.204 Telescopic crane

58

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands