214657
260
Revision A
5.12.2
Replacing Transport Light Bulb
Transport lights are an important safety feature. Keep lights clean, and replace defective bulbs.
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
1.
Lower header to the ground, shut off combine, and remove key from ignition.
Figure 5.210: Transport Light
2.
Remove two screws (A) using a Phillips screwdriver.
3.
Pry off the lens (B).
4.
Push in and slightly turn bulb counterclockwise.
Remove the bulb.
5.
Place the new bulb in the socket, push in, and turn
clockwise until bulb stops.
6.
Replace lens (B) and secure with two screws (A).
5.12.3
Replacing Lens
Transport lights are an important safety feature. Keep lenses clean, and replace if cracked or broken.
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
1.
Lower header to the ground, shut off combine, and remove key from ignition.
Figure 5.211: Transport Light
2.
Remove two screws (A) using a Phillips screwdriver.
3.
Pry off the lens (B).
4.
Install new lens (B), and secure with two screws (A).
Summary of Contents for PW8
