![background image](http://html2.mh-extra.com/html/macdon/pw8/pw8_operators-manual_3429414045.webp)
214657
31
Revision A
Figure 3.6: Endshield Closed
4.
Close endshield (D) and use a slotted screwdriver to
turn latch (A) clockwise until it stops (slightly more than
one-half turn).
NOTE:
When latch is fully engaged, the slot will align with
notch (C), and the endshield will draw tightly against the
header.
5.
Check that magnet (B) on endshield is against the
header endsheet and aligned with the cutout in the
frame, and that latch (A) is engaged.
3.3.3
Removing Left Endshield
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
Figure 3.7: Removing Support
1.
Grasp forward end of endshield (C) and pull open until
support (B) engages and holds endshield in open
position.
2.
Remove nut (A) securing support (B) to endshield (C),
and move support (B) off the bolt.
Summary of Contents for PW8
