![background image](http://html2.mh-extra.com/html/macdon/pw8/pw8_operators-manual_3429414253.webp)
214657
239
Revision A
Figure 5.166: Left Side Spring Float Assembly
Shown
–
Right Side Opposite
4.
Insert clevis pin (A) from the inboard side through the
rod end of spring float assembly (B), three flat
washers (C), and anchor (D) as shown. Secure with
cotter pin (E).
5.
Repeat procedure for opposite side of header, ensuring
that left and right spring float assemblies are set to the
same anchor hole position on header.
Figure 5.167: Left Endshield
6.
Close the left endshield (A). Refer to
, and replace right endshield if
previously removed.
Summary of Contents for PW8
