![background image](http://html2.mh-extra.com/html/macdon/pw8/pw8_operators-manual_3429414185.webp)
214657
171
Revision A
5.5
Drives
This section covers maintenance procedures for the header, draper, and auger drives.
5.5.1
Header Driveshaft
Figure 5.5: Header Driveshaft Splines
Clean and grease header driveshaft splines (A) annually to
prevent excessive corrosion and wear.
NOTE:
Remove header end of driveline to access splines. Refer to
Removing Header Driveline, page 171
5.5.2
Header Driveline
Removing Header Driveline
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
1.
Lower header to ground, shut down combine, and remove key from ignition.
Summary of Contents for PW8
