214657
240
Revision A
5.9
Hold-Downs
Hold-downs help crop to transition smoothly from the drapers to the auger and can be adjusted for crop conditions.
5.9.1
Replacing Fiberglass Rods
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
1.
Lower hold-down, and lower header to the ground.
2.
Shut down the combine and remove the key from the ignition.
Figure 5.168: Outer Fiberglass Rod
3.
Loosen flange nuts (B) securing hold-down bar to hold-
down arms on outer rod (A), and loosen nut (C) next
to rod.
Figure 5.169: Outer Fiberglass Rod
4.
Slide out existing rod, and replace with new rod. Ensure
new rod (A) extends 10 mm (3/8 in.) (B) beyond plastic
sleeve (C).
Summary of Contents for PW8
