214657
91
Revision A
3.12.8
Driveline
Clutch
Figure 3.126: Radial Pin Clutch
The header-to-combine driveline contains a radial pin
clutch (A) that provides protection against overload. When
the auger encounters an obstruction, an overload occurs
and the clutch slips while making a rattling sound and
pulsating action. Frequent slippage of more than 2 or 3
seconds may result in clutch damage.
IMPORTANT:
Prolonged operation of the header with the clutch slipping
will cause damage to the header and/or clutch.
If the clutch becomes permanently damaged, it must be
replaced. Refer to
Replacing Driveline Clutch, page 175
Driveline Guard
DANGER
To avoid serious injury or death, do NOT operate machine if guard is missing or not in place.
Figure 3.127: Driveline Guard
The driveline guard (A) must always remain attached to the
driveline. Tethers (light chains) (B) on either end of the
driveline guard prevent the guard from rotating. Remove the
guard for maintenance purposes only (refer to
).
Summary of Contents for PW8
