214657
230
Revision A
Figure 5.146: Left Side Front Deck
–
Right Side
Opposite
3.
Loosen setscrew in lock collar (A) using a 6 mm hex
key. Rotate lock collar (A) counterclockwise (clockwise
for right side) to loosen and remove collar.
4.
Support the roller with wooden blocks, and loosen two
nuts on bolts (B) attaching bearing to frame.
Figure 5.147: Left Side Front Deck
–
Right Side
Opposite
5.
Pull bearing assembly (A) off roller shaft and remove
from frame.
6.
Place new bearing assembly (A) onto roller shaft and
bolts (B).
7.
Position bearing against frame.
Figure 5.148: Left Side Front Deck
–
Right Side
Opposite
8.
Install bolt (A) (if previously removed), and ensure
shield (B) is in place.
Summary of Contents for PW8
