![background image](http://html2.mh-extra.com/html/macdon/pw8/pw8_operators-manual_3429414194.webp)
214657
180
Revision A
5.5.3
Draper Drives
The two hydraulic drive motors do not require any maintenance. If repairs are required (other than replacing motor
seal kits), motors should be removed and serviced at your dealership.
Removing Front Hydraulic Motor
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
1.
Lower header to the ground, shut down the combine, and remove the key from the ignition.
Figure 5.24: Front Hydraulic Motor
–
Left Side
2.
Disconnect hydraulic hoses (A) from front motor on left
side of header. Install caps onto hose ends, or wrap
with plastic and move hoses away from work area.
IMPORTANT:
Keep hydraulic coupler tips and connectors clean.
Allowing dirt, dust, water, or foreign material to enter the
system is the major cause of hydraulic system damage.
Do
NOT
attempt to service hydraulic systems in the
field. Precision fits require a perfectly clean connection
during overhaul.
3.
Use a 13 mm socket wrench to remove two M8 hex
flange nuts (B).
Figure 5.25: Front Hydraulic Motor
–
Left Side
4.
Pull hydraulic motor (A) from roller shaft.
Summary of Contents for PW8
