MacDon PW8, Operator'S Manual

Page: 190 / 304

214657
176
Revision A
Figure 5.14: Combine End of Driveline Attached
to Combine
4. If the driveline is attached to the combine, remove the
driveline from the combine by pulling the quick
disconnect collar (A) to release the driveline yoke from
the combine shaft. Refer to
Removing Header
Driveline, page 171 .
Figure 5.15: Separated Driveline
5. Lift the combine end of the driveline (A) from the hook,
and extend the driveline until it separates. Hold the
adapter end of the driveline (B) to prevent it from
dropping and hitting the ground.
Figure 5.16: Driveline Guard
6. Use a slotted screwdriver to release grease
zerk/lock (A).
MAINTENANCE AND SERVICING