MacDon PW8, Operator'S Manual

Page: 32 / 304

214657
18
Revision A
•
Disengage header drive, put transmission in Neutral, and wait for all movement to stop before leaving
operator
’
s position.
•
Stop the engine and remove the key from the ignition before servicing, adjusting, lubricating, cleaning, or
unplugging machine.
•
Engage safety props to prevent lowering of raised unit before servicing in the raised position.
•
Use slow moving vehicle emblem and flashing warning lights when operating on roadways unless prohibited
by law.
Figure 1.37: MD #184420
MD #184420
Crushing hazard
WARNING
•
To avoid injury from being pinned or crushed, stay clear
of header while machine is operating or in motion. Failure
to comply could result in death or serious injury.
Figure 1.38: MD #184422
MD #184422
Chain drive hand and arm entanglement hazard
WARNING
•
Do NOT open or remove safety shields while engine is
running.
•
To avoid injury, stop the engine and remove the key
before opening shield.
SAFETY