MacDon PW8, Operator'S Manual

Page: 106 / 304

214657
92
Revision A
3.13 Unplugging the Header
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
1. Stop forward movement of the combine and disengage the header.
2. Fully raise the hold-down.
3. Disengage the pick-up draper drive.
IMPORTANT:
•
To prevent damage to the feeder motor, do NOT engage the feeder reverser for more than five seconds if
the feeder and auger will not turn.
•
To prevent damage to the hold-down rods, raise hold-down assembly before reversing the header.
4. Run the feeder backwards using the reverse controls inside the combine cab to clear the plug.
OPERATION