MacDon PW8, Operator'S Manual

Page: 158 / 304

214657
144
Revision A
4.1.9 New Holland Combines CX/CR Series (CR Series
–
Model Year 2014
and Earlier)
NOTE:
For New Holland CR models 6.80, 6.90, 7.90, 8.90, 9.90, and 10.90, refer to 4.1.10 New Holland Combines (CR
Series
–
Model Year 2015 and Later), page 153 .
Checking Voltage Range from Combine Cab (New Holland)
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the
combine operator
’
s manual for updates.
CAUTION
Check to be sure all bystanders have cleared the area.
1. Raise header until header wheels are 150 mm (6 in.) above ground.
Figure 4.100: New Holland Combine Display
2. Select DIAGNOSTICS (A) on main page. The
DIAGNOSTICS page displays.
3. Select SETTINGS. The SETTINGS page displays.
Figure 4.101: New Holland Combine Display
4. Select GROUP drop-down arrow (A). The GROUP
dialog box displays.
AHHC SYSTEM