MacDon PW8, Operator'S Manual

Page: 44 / 304

214657
30
Revision A
3.3.2 Closing Left Endshield
Figure 3.3: Endshield Support
1. Move endshield (A) slightly so support (B) can be
moved out of the locked position.
Figure 3.4: Endshield
2. Close endshield (A) ensuring magnet (B) and stop (C)
in header frame are aligned. This will ensure that
latch (D) aligns with receptacle (E).
NOTE:
Latch (D) and magnet (B) positions are factory-set and
should not require adjustment.
Figure 3.5: Endshield Adjustment
3. If front of endshield needs to be raised or lowered,
loosen nuts (B) on clips (C) at the back of the
endshield (A), and reposition the endshield. Tighten the
nuts (B).
IMPORTANT:
Do NOT overtighten nuts (B). Overtightening can
damage the endshield.
OPERATION