![background image](http://html2.mh-extra.com/html/macdon/pw8/pw8_operators-manual_3429414231.webp)
214657
217
Revision A
Figure 5.115: Left Side Rear Deck
18. Place bearing support (B) on roller shaft (A).
19. Position base of bearing assembly against frame, and
align mounting holes.
Figure 5.116: Left Side Rear Deck
20. Install two M12 x 30 carriage bolts (A) in the upper
holes and two M12 x 40 carriage bolts (B) in the lower
holes. Bolt heads must face aft. Secure with lock nuts.
NOTE:
Ensure height controller is not damaged when
installing bolts.
Figure 5.117: Left Side Rear Deck
21. Install lock collar (B) onto bearing, and rotate clockwise
until tight.
22. Turn the roller manually until setscrew (A) in lock
collar (B) lines up with the recess in bearing
support (C).
23. Tighten setscrew (A) using a 6 mm hex key.
24. Align the draper deck rollers. Refer to
.
25. Install the hydraulic motor. Refer to
26. Tighten the draper belt. Refer to
Summary of Contents for PW8
