MacDon M155, Unloading And Assembly Instructions

Page: 7 / 272

Section Summary of Change Internal Use Only
ignition before leaving the operator
’
s seat for
any reason.
Added CAUTION:
•
Park on a flat, level surface with the ground
speed lever in N-DETENT position and the
steering wheel in locked position (centered).
Wait for the CDM to beep and display an
“
In
Park
”
message to confirm the park brakes
have engaged.
3.19.1 Removing Windrower from Factory
Stand, page 88
•
Step 2, page 88
Revised step and picture to show all lift lock
mechanisms. Tech Pubs
4.2 Cab Display Options, page 91 Moved topic. Was chapter 4.5. Tech Pubs
4.2.1 Setting the Cab Display Language, page
91
•
Step 5, page 92
Revised NOTE. Tech Pubs
4.3 Configuring the Windrower, page 97 Moved topic. Was chapter 4.2 Tech Pubs
4.3.1 Setting the Header Knife Speed, page 97 Added topic introduction. Tech Pubs
4.3.2 Setting the Knife Overload Speed, page
98 Added topic introduction. Tech Pubs
4.3.3 Setting the Rotary Disc Overload Speed,
page 99 Added topic introduction. Tech Pubs
4.3.4 Setting the Hydraulic Overload Pressure,
page 100 Added topic introduction. Tech Pubs
4.3.5 Setting the Header Index Mode, page
101 Added topic introduction. Tech Pubs
4.3.6 Setting the Return to Cut Mode, page
101 Added topic introduction. Tech Pubs
4.3.7 Setting the Auto Raise Height, page 102 Added topic introduction. Tech Pubs
4.3.10 Setting the Header Cut Width, page
105 Added metric conversions of header sizes and cut
widths. Tech Pubs
4.3.11 Activating the Swath Compressor, page
106 Added swath compressor topic. Tech Pubs
4.3.15 Setting the Engine Intermediate Speed
Control rpm, page 111
•
Figure 4.48, page 111
•
Added topic introduction.
•
Revised picture.
Tech Pubs
4.3.15 Setting the Engine Intermediate Speed
Control rpm, page 111
•
Figure 4.48, page 111
Corrected callouts, or removed unnecessary
callouts from picture. Tech Pubs
4.3.16 Clearing Sub-Acres, page 112 Added topic introduction. Tech Pubs
215015
v
Revision A