215015
93
Revision A
1009136
CXXX
MXXX
DISPLAY UNITS?
IMPERIAL
D
C
A
B
Figure 4.7: Display Units
5.
Press SELECT (D) until DISPLAY UNITS? is displayed on the
upper line.
•
Default setting is displayed on the lower line.
6.
Press left arrow (B) or right arrow (C) to select either
METRIC or IMPERIAL speed display.
7.
Press PROGRAM (A) to exit programming mode or press
SELECT (D) to proceed to next CAB DISPLAY SETUP? action.
4.2.3
Adjusting the Cab Display Buzzer Volume
1009099
CXXX
MXXX
WINDROWER SETUP?
NO/YES
A
B
Figure 4.8: CDM Programming Buttons
1.
Turn ignition key to RUN, or start the engine.
2.
Press PROGRAM (A) and SELECT (B) on cab display module
(CDM) to enter programming mode.
•
WINDROWER SETUP? is displayed on the upper line.
•
NO/YES is displayed on the lower line.
1009131
CXXX
MXXX
CAB DISPLAY SETUP?
NO/YES
B
A
Figure 4.9: Cab Display Setup
3.
Press SELECT (B) until CAB DISPLAY SETUP? is displayed on
the upper line.
•
NO/YES is displayed on the lower line.
4.
Press right arrow (A) to select YES. Press SELECT (B).
•
DISPLAY LANGUAGE? is displayed on the upper line.
