215015
173
Revision A
1.
Shut down the engine, and remove the key from the
ignition.
1000754
A
B
Figure 6.5: Header Leg
2.
Remove hairpin (A) from pins (B), and remove pins from
both header legs.
1008925
A
Figure 6.6: Ground Speed Lever
CAUTION
Check to be sure all bystanders have cleared the area.
IMPORTANT:
Before starting engine, remove protective cover from
exhaust stack.
3.
Start the engine and activate HEADER DOWN button (A) on
the ground speed lever (GSL) to fully retract header lift
cylinders.
1008942
A
Figure 6.7: Ground Speed Lever
4.
Press REEL UP switch (A) on the GSL to raise the center-link
until the hook is above the attachment pin on the header.
IMPORTANT:
If the center-link is too low, it may contact the header as
the windrower approaches the header for hookup.
